Showing posts with label energy density. Show all posts
Showing posts with label energy density. Show all posts

Tuesday, October 20, 2015

The Hero with four faces: Part 1

A few years ago, when I visited a battery company with a few colleagues, I saw data from the company that was pretty impressive.  Slide 1 showed the rate capability of the battery, which was better than the state-of-the-art; Slide 2 was a calculation of the energy density, which was better than the baseline; slide 3 was cycle life and this too looked impressive; slide 4 was…

You get the drill. 

Suitably impressed, I came out wondering what I needed to polish in my resume to land a job at the company before they went public… when my travelling companion wondered aloud if each slide was from a different battery!

 My colleague had a point.  Most (not all) battery chemistries can be made to perform well for a particular metric.  The trick is getting all the metrics to work out for the same battery. 

Make the electrodes thin to get power; make them thick to increase energy (but at the loss of power).  Increase the voltage to increase the energy, but at the loss of cycle life.  The endless games one can play.  This dependence of battery design, cycling conditions, voltage of operation, etc. on performance is the reason battery companies have been getting away with obfuscation. 

But is it really obfuscation?  A proof-of-concept can be a useful learning tool.  If going to high voltages yields more energy but kills the cycle life, while we know that the voltages being accessed should be possible, then it gives us hope that the problem is not fundamental and that a solution exists.  Given time, maybe we will find it. 

Then again, we have been looking for a cure for baldness for ages.  There is proof that baldness is not fundamental (after all, some are oh so lucky), but that does not mean we will find the answer to that problem either.    

But there is merit in learning about what the best possible system is and understanding why it is the best.  To this end, I thought I would list out the best-known (at least to me) battery chemistry for each of four metrics of importance:  energy, charge time, life, and cost.  Each would be a “Hero” battery; a term borrowed from other technology areas to denote a proof-on-concept that something amazing is possible for that metric.  While each metric has a different “Hero” battery there are probably lessons we can learn from them.  These lessons, I summarize in the end.

The energy-density Hero:  All seven readers of my blog know that Li-ion batteries are the highest energy density secondary batteries one can buy, with energy density in the range of 250 Wh/kg.  But the Hero is actually the Li-thionyl chloride battery, which has an energy density of 550 Wh/kg and is, more importantly, commercially available.  The catch is that it is a primary battery (i.e., not rechargeable). 

What gives?

Typical Li-ion cells have a graphite anode.  Moving from graphite to Li metal (which holds ten times the charge and results in a slightly higher voltage) bumps the energy by 50% without changing anything.  On top of that, the thionly chloride cathode has a capacity of 450 mAh/g compared to 180 mAh/g for typical Li-ion cathodes.  Combine the two and you get something much better than Li-ion.

Imagine a battery with 2x the energy density.  Maybe we double the range of a Nissan Leaf, making it a car that is actually useful (joking, joking, all you Leaf lovers) for the same cost.  Or cut the cost of the Tesla battery by half without sacrificing range, bringing it tantalizing closer to the point where everyone can continue to not be able to afford it. 

Unfortunately, all these will not come to pass because the Li anode does not recharge gracefully while the thionly chloride cathode is not at all rechargeable.  If you want to know why, you have to read my blog post titled “A Brief History of Batteries- Part 1” and “A Brief History of Batteries- Part 2”.  Frankly, everything you need to know about batteries is probably hidden somewhere in these pages. 

To make it rechargeable, you just need to change the anode, the cathode, and the electrolyte (i.e., all the three components that make a battery).  When you do that, the battery now cycles a lot better, but at the loss of capacity. 

So is 550 Wh/kg the ceiling?  No.  There is a lab demonstration of a 750 Wh/kg Li-air primary battery.  This would be a record for energy density.  But as I have alluded to in the past, a one-off lab demonstration does not a product make.  So, for now, we shall call 550 Wh/kg the Hero for energy density.  As an aside, the Li-air battery also does not cycle. 

Reversibility restricts us to certain materials; a constraint when removed, allows high energy density batteries to be made. 

An interesting question to ponder: Is it possible to get batteries that are rechargeable and at least as high in energy as these Hero’s?  

The fast-charge Hero:  One of my funnier blog post was titled  “I’ll be back…in 8 hours”.  That post had nothing to do with charging times (then again, this blog is like Seinfeld; its about nothing, as far as I can tell) but the title articulates the problem:  We tend to want to charge our batteries very slowly.

Charge them too fast and we have unwanted side reactions (lithium plating and electrolyte breakdown) that can degrade the battery.  1h charge is doable, 30 mins makes it degrade a bit; 10 mins a lot more; 1 min would basically kill the battery (and kill you from the fire that is creates). 

This is true for most batteries, but it is not fundamental.  Meaning, there is no law that says that we cannot charge a battery fast.  One can design the battery for fast charge.  But the compromise is loss of energy. 

How fast do we really need to charge?  For an electric car, a really smart person (who shall not be named) told me that we needed to charge within the time frame of a restroom break.  Another smart person told me that we needed the battery to charge and discharge fully within the time frame of clouds covering a solar panel.  After a few experiments timing myself on restroom breaks and watching clouds move (I plan to watch grass grow next) we can approximate the charging time needs as 5 minutes.  What can I say: I was having an Austin-Powers-just-got-out-of-hibernation moment. 

The question of the grid actually handling this kind of electricity load is a whole other area of debate, but let us focus on the battery for a second.

Electrochemical capacitors can easily charge this fast.  But they have no energy.  Question is: Is there a battery chemistry that can mimic a capacitor’s charge rate?

There was one system that was kind-of-sort of commercialized that I would consider the Hero in this regard.  This was the Toshiba Super Charge battery, which is rated to charge to 80% capacity in 6 minutes and more than 95% in 10 mins!

Here the anode (lithium titanate) operates at a higher voltage than the typically used graphite anode. This helps because the potential of the anode is far away from the lithium plating potential.  This makes it much easier to charge fast and not worry about plating lithium, shorting, and the ensuing degradation and possible fires.   

But the downside is that the higher anode voltage decreases the overall cell voltage, which in-turn deceases the energy.  The battery has a third of the energy density of a typical Li-ion cell (so a third the driving range).  At 90 Wh/kg and 177 Wh/l at the cell level, it is far, far lower than most Li-ion batteries.  Cost of these devices scales with the energy:  this battery will probably cost three times a typical Li-ion cell!

So… an ideal EV battery for the super-rich-with-overactive-bladder demographic?  

Question is: can we get both high energy and fast charge?

If we want to get there I believe we cannot use thick porous electrodes.   While they are great to spread the current, it seems impossible to get away from the electrolyte losses of these highly-resistive organic electrolytes.  Which means that we cannot have thick bulky current collectors and separators.  But then how do we collect the current (especially if the currents are high, which seems likely with fast charge batteries)?

Should we move to electrodes that are not porous?  This limits the useable energy, unless we use electrodes that undergo deposition. One can continue to deposit the metal on top of itself and so “build” capacity, without the added losses from the porous structure.  This may be an avenue. 

My suspicion is that even if we find ways for the electrodes to accept the charge at that rate, the electrolytes in lithium-based batteries will not have the ability to move ions from one side to the other.  Unless we move toward much thinner separators.   This topic requires some careful thinking.

But let us revisit the question: how fast do we really need to charge? 

If we can ensure we have a 400-mile range battery, this should translate to an approximately 5-6 hour driving time (at 70-80 mph).  Then we may be willing to wait a half hour to charge the battery as we make a beeline to our favorite artery-clogging fast food joint. 

For the grid, if we can use the battery to not just take care of the intermittency, but also to time-shift from peak to off-peak, we can size the battery for the time shift and use the (big) battery for handling the small 5-min intermittency.  Each 5-min charge and discharge would only require the battery to swing by a few percent: easily possible with most systems. 

The catch: both of these would require us to pay for the bigger battery!  But hey, batteries are getting so cheap, and companies are going to give us money when they hand us the battery anyway. 

The cycle/calendar-life Hero:  I know what you are thinking: there is no such thing as a cycle-life Hero!  After all, every battery we own seems to last all of 1-2 years before they crap out.   You must be thinking that our Hero must be a 3-year life battery.

What if I told you there are batteries that last 20, even 30+ years and they cycle 20,000 times (no error there, really meant to have four zero’s)?  And what if I told you that these batteries are not the hybrid car batteries that cycle 3-5% per cycle but are cycled deep, greater than 50% of the capacity per cycle?  And that they are (at least they were) being used day in and day out? 

Imagine batteries that last as long as a solar panel.  Imagine being able to cycle them once a day and make them last those full 20 years with no maintenance.

Intrigued?  Come back next week and you shall learn more.


 Venkat


p.s. the title of this post is inspired by the Joseph Campbell book “The hero with a thousand faces.”  Campbell was trying to point out that all the world’s myths, across religions, shared a Hero figure with similar characteristics.  We will see next week that in batteries there is no one Hero.  We basically have four Hero’s with four faces.  

Monday, February 7, 2011

I'll be back... in 8 hours

Some of my readers have wondered why I have been off the blogosphere in the last few months. The reason is that we brought a house and the move from the apartment to our new place has been a bit of a time sink.

First we went through the four stages of home buying:

Stage 1: What the &%#@ do you mean they accepted our bid? I thought you said we were lowballing?

Stage 2: When you use words like "downpayment", does this involve us giving you a check?

Stage 3: I assume roof's are like batteries? Meaning, when you say it is at the end of its life, there is still 80% left, right?

Stage 4: Keep repeating after me: "Owning is better than renting" and, please, stop asking "why?"!

Then we realized that owning a house also meant owning things like leaf blowers and lawn mowers! So, when I saw that there was a battery-powered lawn mower, I jumped at the chance to push my favorite technology forward.

I was looking forward to using my expertise in batteries to maintain and extend the life of my lawn mower for many years to come.

I was not particularly looking forward to mowing the lawn, but owning a battery-powered mower seemed to make up for that.

Until I realized that the top-rated battery-powered mower uses lead-acid batteries.

Lead-acid!!! really! How old school can one really get.

My first thought: Start a battery company to make Li-ion batteries for lawn mowers.

Then I started thinking about this some more. There must be a catch here. So I started digging into what it was.

Let us do some math: The battery for this lawn mower cost ~$270/kWh. That is one expensive lead-acid battery. Presumably, it is a deep-discharge battery, and so it is better made than a car battery.

And there is probably a significant markup.

Did I mention that the mower was on sale for $300! More like a mark-way-way-up.

Considering a typical Northern California growing cycle, this mower will probably be used ~50 times a year (once a week). These deep-discharge batteries can probably go a few hundred cycles. So I'm thinking 4-5 years easy.

But the bigger problem is going to be the calendar life. Sulfation can kill these cells.

Having said that, the battery is probably going to be at the top-of-charge pretty much through its life (think about it: Mown for 1 hour. Keep it plugged in all week). And remember our rule for lead-acid batteries: Keep them charged. So I think we can expect to get ~3 years from these cells.

Lets do some math for a Li-ion battery. I bought one a few weeks ago. This battery will probably last me 3 years and get me ~300 cycles or so. So it has similar specs to the lead-acid battery.

The Li-ion battery, on the other hand, cost me a whooping $2300/kWh!! No... really. This is what it cost me.

Now... knowing Apple, a new word has to be coined for their level of markup. But still this is one expensive battery.

At this price, a Li-ion lawn-mower-battery would have cost me $800!

All you MBA-types are probably cringing because you all know that cost and price are very different from each other and that the price is dictated by what the market is willing to pay (my wife is an MBA and she gave me this spiel).

Granted. So let us do a cost-differential comparison. This comes out to be ~$50/kWh more expensive for a Li-ion cell. Using this, the cost of a Li-ion battery for this mower would be higher than the lead-acid battery by... the price of lunch!

Not at Chez Panisse. But at the LBNL cafeteria (same quality, but at a much lower price?)

So why not use a Li-ion instead. After all it is almost 5x the energy density.

The mower that I have been talking about in this blog is a push mower. So the battery does not need to drag itself. All it has to do is turn the cutting blade. And space is not a big constraint. The mower's size is dictated by the size of the blade anyway.

So why bother using a new type of battery when you don't really see much of a benefit?

Frankly, although I have not looked at the life-cycle, I'll take a bet that it is probably better for the environment to use a lead-acid battery considering how much of this lead is recycled. In comparison, all you recycle in a Li-ion is the high-value metals in the cathode. The rest, literally, goes down the drain.

Maybe the math will change for a self-propelled mower. Or if the weight of the mower is an issue. But I don't see any reason to jump to using a Li-ion battery for the mower I was looking at. This business plan does not appear to have much legs.

So what did I do? I got the corded version of this mower. It cost me $100 less.

I guess the price that I'm willing to pay to push my favorite technology forward is less than $100!

In my guilt I decided to do my part for the technology by buying a Roomba.

I'm not sure if you guys know about this amazing robotic vacuum. It is pretty interesting to watch. It has sensors that make it slow down when it approaches objects, detect dirt, and prevent it from falling off of stairs.

It is not particularly good at vacuuming. But it feels like it is cleaning the floors and isn't that what's important!

But here is the kicker. The one I have has a Ni-MH battery.

I suppose I should be thankful it is not a lead-acid, but Ni-MH? COME ON!

The last time I checked, the cost of Li-ion and Ni-MH batteries were pretty comparable. And the energy density of Li-ion is 2-3x greater. And remember that in this machine (unlike the mower) the vacuum has to drag its battery along. And space is a big deal. The smaller the footprint, the smaller the space it can vacuum.

So why use a 20th century battery for a 21st century machine? Strange.

A web search revealed that Li-ion Roomba's have apparently died prematurely. If this is the case, then iRobot (the company that makes the Roomba) needs to change battery suppliers.

The vacuum I got goes through 2 rooms and then runs out of juice. It could have finished my house in one charge if it had a Li-ion of the same size. Or you could have a better vacuum on it so that it actually picks up dirt instead of moving it around and still only vacuum 2 rooms. You get the point.

When I first saw this machine, I thought that all the things on Terminator (the movie) were coming true. Jokes apart, it really is a pretty decent robotic cleaner which does indeed find its way around. You can, pretty much, set it and forget it.

But then I realized that we had nothing to worry from the machines as long as battery technology evolves the way it has been in the past.

When Arnold Schwarzenegger's character said "I'll be back" on T2, he (it) actually meant "I'm running out of battery and I need to go find an outlet and charge for 8 h. I will then come back to look for you for the 1/2 hour my battery lasts. Wish me luck".

So much for the machines taking over.

If you constantly complain about how batteries are not evolving fast, did you ever consider for the second that maybe we are out to save the world in our own way?

Venkat

Tuesday, August 10, 2010

A shout-out to the separator

Anybody who has paid attention to batteries (especially, lithium batteries) and/or read this blog knows that in most batteries the anode and cathode materials are the main players for holding charge. There is a lot of research in trying to find new materials that hold more charge at high voltages. But as I have pointed out in my previous posts, we need a few other materials to ensure that we tap into this charge.


Things like current collectors, separators, and the electrolyte.


All these play as important a role as the electrode materials. In some cases, they are actually more important. I have decided to spend sometime giving them the credit they deserve.


I will start with a shout-out to the separator.


Most electrochemical systems (and, yes, batteries fall in the class of electrochemical systems) require some way to separate the anode and the cathode. One tries to keep these electrodes in very close proximity to decreases resistances for ions to travel between them while preventing shorts. An ideal way to achieve this is via the use of a separator. It’s a (arguably) simple physical barrier between the two electrodes that lets ions go through, but not electrons.


However, in some cases, the separator serves a larger purpose. For example, it also ensures that the anode and cathode reactants/products don’t mix. If you are trying to electrolyze water to make hydrogen and oxygen, it helps to not have them mix together (trust me). Separators help ensure that.


Be it a fuel cell, a flow battery or a containerized battery (like a lithium battery), a lot of effort is spent on the separator to make sure that it does its job. For the flow battery that we are planning to work on with a recent ARPA-E award, the separator will be an integral part of our developmental effort.


In the battery space, the separator has always had its part to play. In a lead-acid battery the absoptive glass mat (AGM) separator helps increase the life of the battery. In batteries that use zinc or lithium metal, the separator may help prevent dendritic shorts by retarding the growth of the dendrite. And in the Ni-MH battery it can help decrease the rate of self discharge.


Which bring me to the first news item that caught my eye.


After coming up with the magical iPhone and the magical iPad, Apple has recently unveiled the Magic Trackpad. Interestingly, Apple also announced that they were selling rechargeable batteries with a (magical?) charger for the trackpad (which operates on Bluetooth). Trust Apple to make a Ni-MH battery with a charger sound cool. Will the magic never stop?


In general, the Ni-MH battery is a terrible battery for Bluetooth applications. This battery has notoriously high self-discharge. A typical Ni-MH battery can discharge by as much as 20% of its capacity in 2 weeks in the SF Bay Area and 50% in balmy India, in summer. Bluetooth devices are used sparingly (hopefully your job does not require you to type 24 h a day), so the self-discharge can be a killer.


Apple, on the other hand, is promising 20% capacity loss in 1 year. Magical you think?


Not really. The answer, my friend, is (partly) a separator blowing in the wind.


There are three reasons why Ni-MH batteries self discharge. The first is oxygen evolution on the nickel electrode, the second is hydrogen evolution on the metal hydride electrode, and the third is a nitrate redox shuttle across the two electrodes. All three are forms of internal leaks that discharge the battery.


Mother Nature dictates the first two. It can be hard to beat Mother Nature, especially for mere mortals like me (and, yes… even Steve Jobs), but there are some things we can do to decrease the rate of these gas evolution reactions.


The third mechanism is what interests me in this post and it involves using a separator that traps the nitrates and prevents the ion from shuttling across. This prevents the battery from slowly leaking and keeps the battery charged. Very simple, yet very effective.


These developments in this mature chemistry are only 5 years old and have resulted in a significant decrease in the rate of self-discharge. Which takes me back to my post on how we tend to ignore older chemistries (read non-lithium) in most, if not all, R&D projects in this country.


So here is a shout-out to the humble separator.


Separators for lithium-ion batteries are more crucial in that they can be the difference between an iPhone that is plagued by dropped calls because of antenna issues and one that is burning your pant pocket.


Separators have a checkered history when it comes to lithium batteries. Remember that the volume occupied by this layer is excess space that is wasted. There have been many moves to try to decrease the thickness of the separator, but attempts at making this layer less than 20 microns result in the electrode shorting during a winding process that is part of battery assembly. Shorting a battery is typically not a good idea! Most separators today are 20-25 microns in thickness.


Moreover, these separators have what is called a “shut down” layer. This layer, made of a polymer that melts and shuts the pores if the temperature increases too much, is a mechanism by which reactions are stopped if a battery goes into thermal runaway (or “spontaneous disassembly”, as the industry calls it). However, there are some that say that when this melting occurs, the structural integrity of the separator decreases and the electrodes end up shorting with each other. Statements regarding shorting being a bad idea apply. This issue is still being played out.


As an aside, a couple of researchers at LBNL are doing something interesting with the separator. Tom Richardson and Guoying Chen incorporated a conducting polymer that prevents the battery from going to overcharge. Overcharge causes the thermal runaway in lithium batteries. The idea is to prevent the overcharge and hence make the battery safer.


But lets get back to the separator we use today.


You may remember that YouTube video’s of burning laptops. You may also remember that the cause was attributed to metal particles falling into the battery during assembly and leading to shorting. A way of dealing with this issue is to make a stronger separator; one that will prevent shorting even if particles fall into the battery. Some manufacturers are testing ceramic coatings on the (presently-used) polymer separators to see if this will increase the puncture resistance. This issue is also still being played out.


Obviously all these problems will go away if the electrodes were not kept so close to each other by using a thicker separator. But this decreases the energy density of the battery and decreases the power. Obviously, no one wants that!


Other than being crucial from a safety perspective, separators are also one of the culprits in making lithium batteries expensive.


Battery costs are impossible to find with any clarity (The US military can learn from battery companies on how to keep secrets and prevent incidents like the one with Wikileaks). But, estimates suggest that material costs can range from 50-80% of battery costs. And 25% of the material cost is the cost of the separator!


Think about this. This simple polymer layer, very similar to the polymer used to make grocery bags, can be as much as 20% of the cost of the battery! At the sake of repeating myself, batteries are expensive and we have to decrease the cost significantly to get any widespread penetration of EVs and PHEVs.


Part of the reason why separators are expensive is because of a process that creates the pores. And it appears that the market for separators does not have enough competition to drive down costs.


Which brings me to second news item.


Dupont just announced that they would be getting into the battery separator game by manufacturing their line of lithium battery separators. Information is scarce, but they appear to be using a different process than what their competitors use and promise higher power, and a higher operating temperature. No word on cost, but now there is one more player in this game bringing some competition. That can only be good.


Now if someone can come up with a way to make a really strong separator that is say, 5 microns thick, has a open path for ions, can withstand the winding process, does not puncture even when there are metal particles in the battery, and costs less than $1/square meter, then we should be all set.


For the uninitiated, the paragraph above is like hoping that Microsoft comes up with an operating system that does not crash all the time. It seems doable, but for some reason it never seems to happen!


Until then, let’s thank the separator that we do have.


Venkat

Monday, June 28, 2010

In batteries, 2+2=1. Actually more like 1/2. Well... maybe a bit less.

This is a blog post I've wanted to write for a decade. The reason I haven't (other than the obvious problem that a decade ago, I did not know what a blog was!), is because its a tough post to write. But, folks tell me that I have a gift for explaining things (I use the world "folks" is a generic sense to indicate a number greater than 0), so I shall try.

Everyone wants to make a better battery. What they mean when they say "better" is a battery that has more energy. This is what many (not all) battery researchers are trying to do, and this is what every user wants. If you read my post titled "A Moore's law for batteries? Maybe not", you will know that the game is to find new materials that make up the anode and cathode of a battery.

The idea here is to find a new material that has more capacity than the existing material and/or find one that operates at a higher voltage. Capacity is a measure of the amount of charge (electrons) you can get per gram. More is obviously better. Capacity times the voltage is energy; for real-world applications what matters is the energy. Typical numbers for capacity for lithium-ion batteries would be 140 mAh/g for the cathode and 330 mAh/g for the anode. The typical voltage of a lithium-ion battery is 3.7 V.

A lot of research in lithium-ion batteries is focussed on increasing the capacity. There is also an active area of interest in increasing the voltage to above 3.7 V. Increasing the voltage is going to be hard (very hard), so increasing the capacity appears to be the way batteries will improve, atleast in the short-term.

Simple enough.

Those of you who are paying attention have probably noticed that for every gram of material, you only have ~1/2 the capacity in the cathode compared to the anode. If you want to make a battery with a capacity of, say 330 mAh, then you have to take 1 gram of the anode, but you need 2.35 g of the cathode (330/140). What this means is that you have a total weight of 3.35 g to get a capacity of 330 mAh. So the capacity of your battery is actually 98 mAh/g (330/3.35). So you started with a anode at 330 mAh/g, a cathode at 140 mAh/g and you get 98 mAh/g for the battery. A 2 mAh/g cathode with a 2 mAh/g anode give you a 1 mAh/g battery. 2+2 is actually only 1. Certainly not 4. Not even 2! Welcome to batteries.

If you have a new anode with say 10 times the capacity (so 3300 mAh/g) you can do the same math and you will get a cell capacity of 134 mAh/g (for a battery of capacity 3300 mAh the weight is 24.5 g). You go to all this effort to make something 10 times better and you get to use your iPhone for an extra 30% talk time. A bit disappointing! On the other hand, if you had an cathode that was, say, twice as good, at 280 mAh/g (with an anode at 330 mAh/g), then your cell capacity goes up to 151 mAh/g. Much better. 50% better. This is why most researchers want to find a better cathode. Its more bang for the buck.

All this is pretty simple. All battery folks know this. 2+2=1. End of story.

Or is it? There is another small factor that even battery researchers sometimes miss. This factor is the dead weight in a battery.

If you really want to use the anode and cathode, you need some extra real estate. Things like separators to keep the electrodes apart, current collectors to collect the current, and packaging to make sure you contain it in a neat little package. All these add weight and volume. It doesn't matter if you have 10 times the capacity in a new anode, you still have to carry this dead weight.

This is a lot like a gasoline-powered car. Only the gasoline has any useful energy in the car. But to use the gasoline, you need a tank, an engine, the wheels, the drivetrain.... you get the point.

Obviously, if you can make the weight of the rest of car as light as you can (no seats?), it helps you get more from your tank of gas. Similarly, if you can minimize the amount of unwanted weight, it helps a lot in the battery. What this means is that you try to increase the ratio of the active materials (the anode and cathode) to that of the inactive material (the separators, current collectors etc).

But there is a catch. Turns out that you can't increase the amount of the active material willy-nilly. It has to do with losses in a battery. If you put extra active material in, you have to add a bit of the inactive with it. And increasing the amount of active materials involves making the anode and cathode thicker and there is a limit to how thick these can be made before losses become prohibitive. One needs to account for these factors.

*Geek meter on*

Remember the example above where we calculated 98 mAh/g using a battery of capacity 330 mAh with a weight of 3.35 g? If you do the math on the extra weight for the inactive material, you have to add an extra ~3.35 g. You can do the math to convince yourself of this number or you can trust me. I would suggest doing the latter. So you actually only get a capacity of 49 mAh/g (1/2 of 98)! 2+2=1/2!

For you battery geeks, you can verify these numbers by calculating the theoretical energy of the battery using the 98 mAh/g and multiplying by 3.7 V to get 360 Wh/kg (the theoretical capacity of a graphite/LiCoO2 cell). You can calculate the practical capacity by multiple 49 mAh/g by 3.7 V to get ~180 Wh/kg (A typical value for a 18650 cell using cobalt oxide). Well well well... the math works, does it not?

Here is the rub. Remember the example where we had an anode that has 10x the capacity. We had a cell capacity of 134 mAh/g. If you do the calculation for the extra weight and recalculate the capacity you get only 55 mAh/g.

You have to think about this a little bit, but it turns out that if you have more capacity you will need less of the anode, so now the inactive weight becomes a larger fraction of the total weight of the battery. You could have compensated for this by taking the same weight of the anode and just talking a lot more cathode, but like I was saying, this is impossible because it increases the losses in the battery to a point where it would be useless.

So we have an anode with 10x the capacity and we gain 12% in cell capacity (and don't get me started on the voltage! That is for another post).

If you don't believe me, do the math. If you don't know how to do the math; I guess you have to believe me! It would be embarrassing if someone spots an error; but then again I'm assuming that no one has actually made it this far.

If you do the same math on the battery where instead of the anode being better, the cathode is twice the capacity, where we calculated a cell capacity of 151 mAh/g without the inactive weight you will calculate a cell capacity of 68 mAh/g with the inactive material. So you made a cathode of twice the capacity and your cell capacity actually went up by 38% (remember we calculated this to be 50% better before).

Turns out that even if you make a battery with 3300 mAh/g for the anode (in a sense, this is close to the best Li-ion anode we know of) and a cathode of 280 mAh/g (the best Li-ion cathode we know of) we get a cell capacity of 110 mAh/g. 2.2x the present-day battery. But this assumes the voltage of the two are the same. In reality the materials that have this capacity have a lower voltage, which means that the energy is not really that high. Turns out that this best base scenario battery is better by maybe a factor of 1.8 to 1.9. Meaning, this battery will approach 340 Wh/kg.

*Geek meter off*

As a matter of fact, everything else being equal (i.e., amount of inactive material), the best Li-ion battery we can dream of making in the future, based on what we know as of late June 2010, will have a energy density of ~340 Wh/kg. If you want something better, you pretty much have to work on the inactive material. All these are for cell-level numbers. If you go to a battery pack, things get even worse, but that is for another post. If someone tells you that they can make a battery where the energy is greater than this, you better dig.

Most people, including battery researchers, don't think about this extra weight. Its actually a very important factor in a battery. There is such a great focus on new materials that folks forget that reality may be as good as your simple math leads you to believe. In addition to new materials, we have to think about ways to decrease the inactive materials in a battery. There is far too little research on this and a lot to be gained from doing something about it.

So next time you hear about a new material with more capacity, ask not how much more theoretical capacity you can get, instead ask how much practical energy you actually get. Remember that you can't just divide theory by 2 to get practical; it could be less (a lot less). And don't forget the voltage. Its also critical.

To help you, here is a link to a excel spreadsheet that has a battery simulator specifically for a lithium-ion battery. I hope the mac version of excel is compatible with a PC. The sheet that has the calculations is protected. Contact me to unprotect. Let me know if you catch errors. The simulator makes a LOT of assumptions. If you want them all relaxed, contact me.

Venkat